Solar Power

MANY, if not most people, when they hear the term ‘solar energy’ or ‘solar power’, will think of ‘PV’ or Photo-Voltaic panels, those shiny things on rooftops  that make electricity. However, in the broadest sense, solar energy supports all life on Earth, and is the basis of almost every form of energy we use. Plants use the sun’s energy to make food. In fact, plants that lived in swamps became compressed underground millions of years ago, and formed fossil fuels such as coal and oil. Photovoltaics
To convert sunlight into electricity, we use solar panels (also solar module, photovoltaic module or photovoltaic panel), which are constructed with silicon photovoltaic cells. A photovoltaic system typically includes an array of solar panels, an inverter, and sometimes a battery and interconnection wiring.
In 1839, French scientist, Edmund Becquerel discovered that certain materials would give off a spark of electricity when struck by sunlight. This helped develop the first solar cells that were made of selenium in the late 1800s. In the 1950s, scientists at Bell Labs revisited the technology and, using silicon, produced solar cells that could convert the energy in sunlight directly to electricity.
The most important components of a PV cell are two layers of semiconductor material generally composed of silicon crystals. On its own, crystallized silicon is not a very good conductor of electricity, but when impurities are intentionally added—a process called doping—electricity can be created. The bottom layer of the PV cell is usually ‘doped’ with boron, which bonds with the silicon to bring about a positive charge (P). The top layer is ‘doped’ with phosphorus, which bonds with the silicon to bring about a negative charge (N).
The surface between the resulting “P-type” and “N-type” semiconductors is called the P-N junction (see diagram).
When sunlight enters the cell, its energy knocks electrons loose in both layers. Because of the opposite charges of the layers, the electrons want to flow from the N-type layer to the P-type layer, but the electric field at the P-N junction prevents this from happening. Extremely thin wires running along the top of the N-type layer provide the necessary path for electrons to travel to the P-type layer, producing electricity.
Most PV systems consist of individual square cells averaging about four inches on a side. Alone, each cell generates very little power (less than two watts), so they are often grouped together as modules. Modules can then be grouped into larger panels encased in glass or plastic to provide protection from the weather, and these panels, in turn, are either used as separate units or grouped into even larger arrays.
Electricity can be also be generated using solar furnaces, which use a huge array of mirrors to concentrate the Sun’s energy into a small space and produce very high temperatures. This is known as indirect conversion since sunlight is concentrated using lenses or mirrors to generate heat. The heat is then transferred to a transfer fluid for a conventional power plant or it can even be combined with PV arrays to improve their efficiency. It is the same basic process as using a magnifying glass to burn something.
Apart from producing electricity, solar energy is also used for solar water heating, where heat from the Sun is used to heat water in glass panels on roofs. Water is pumped through pipes in the panel. The pipes are painted black, so they get hotter when the Sun shines on them.

Why Go Solar?
Apart from the initial set up costs, solar energy is absolutely free and is almost always available especially, here in the tropics. It offers even remote areas a chance to get a regular supply of power and allows these communities to be self-sufficient. Moreover, since solar energy doesn’t rely on constantly mining raw materials, it doesn’t impact on forests and eco-systems as occurs with most fossil fuels use which unfortunately does have negative environmental impacts at the extraction, refining, and use. Moreover, irresponsible practices in vulnerable areas and accidents related to fossil fuel extraction, transport, and use increase their threats to the environment.
The biggest benefit of using solar energy, however, is the fact that there is no emission of greenhouse gas, since solar energy is produced by conducting the sun’s radiation – a process that does not involve any smoke, gas, or other chemical by-product.

Make your own Solar Pizza Oven
This is a great way to see how the sun’s rays can be turned into thermal energy, useful in our daily lives to cook food among many other things. This activity should be done on a sunny day to ensure that the oven cooks at or above 200 degrees. Take caution! It functions like a real oven, so don’t touch!
You will need:
•    a pizza box that has been cleaned out
•    ruler
•    aluminum foil
•    scissors
•    plastic wrap
•    glue stick
•    black construction paper
1.    Draw a one-inch border around the top of the pizza box. Cut along three sides, leaving the line along the back of the box uncut.
2.    Form a flap by gently folding back the uncut line to form a crease.
3.    Cut a piece of aluminum foil to fit on the inside of the flap. Smooth out any wrinkles and glue into place.
4.    Measure a piece of plastic to fit over the opening you created by forming the flap. The plastic should be larger than the opening so that it can be taped to the underside of the box top. Be sure the plastic becomes a tightly sealed window so that the air cannot escape from the oven.
5.    Cut another piece of aluminum foil to line the inside of the pizza box and carefully glue into place.
6.    Cover the bottom with black construction paper and glue into place.
7.    Close the pizza box top with the window, and prop open the flap with the ruler you used to measure before. (A wooden dowel or straw may be used as well.)
8.    Adjust until the aluminum reflects the maximum sunlight through the window into the oven interior.
Enjoy your treats! Ovens will have to preheat about 30 minutes before cooking anything. You can heat up pizza, cook hot-dogs, and melt nachos, just to name a few!

You can share your ideas and questions by sending letters to: “Our Earth, Our Environment”, C/O EIT Division, Environmental Protection Agency, Ganges Street, Sophia, GEORGETOWN or email us at eit.epaguyana@gmail.com

SHARE THIS ARTICLE :
Facebook
Twitter
WhatsApp
All our printed editions are available online
emblem3
Subscribe to the Guyana Chronicle.
Sign up to receive news and updates.
We respect your privacy.